is a participant in the Amazon Affiliate program. We may earn a small commission form any successful purchase, for more details

Top 05 Ford 4.0 V6 Problems [Crucial Problems with Fixing Tips]

If you are hoping to get a Ford 4.0 V6 or have one already and wonder how you can deal with Ford 4.0 V6 Problems, read through this article.

It reveals the problems alongside the solution of this engine type.

In addition to that, it will discuss Ford 4.0 V6 performance and Ford 4.0 V6 reliability. These are essential information owners need to have about their vehicle engine.

Even though owners of vehicles always try to make sure that the engines are problem-free.

Moreover, it may not be very possible because, like other devices made to serve human needs, they have their pros and cons.

These problems differ from type to type, with some being less challenging than others.

Also, engines’ performance and reliability vary and help determine which is better than the other.

Crucial Ford 4.0 V6 Problems: Top 05

Like other car engines, this engine equally has its cons. However, Ford 4.0 V6 problems are manageable, and its good sides far worse.

Below are a few concerns with the engine and effective ways of managing these concerns.

01. Transmission Problem

This is a very common problem that comes up when you are driving a Ford 4.0 V6. This situation usually appears due to wear on the body of the case or valve.

Moreover, this wear typically affects the intermediate and override servo bores.

Usually, oil applies to the servo through the servo pin bore and hollow pin. The hollow pin is designed to seal the servo pin bore and release the two servos’ oil.

However, in the long run, the pin no longer seals appropriately because of wear of the number of applications and releases.

Pressure is lost due to leakage of the servo; therefore, the band cannot be applied entirely or released quickly to curb its burning.

In addition, because the override servo usually is used for the fifth and second gear, it tends to have more wear. 

If you do not want to replace the entire case, puncture the servo bore and put in a “cesleeve” to counteract the wear. A brass sleeve is more long-lasting than a case made of aluminum.

Also, avoid fairly used cases.

02. Chirping Sound/ Timing Chain Problem

This model of Ford engine comes with an intervening jackshaft where the pushrod cam should be, in the middle of the block.

However, this intervening jackshaft is connected to the crankshaft by a short timing chain located in front of the engine.

Next, the jackshaft connects the cam on the left side of the engine by a longer timing chain that lies behind the first.

Finally, another timing chain found in the back of the engine attaches the back of the jackshaft to the overhead cam in the head of the right cylinder.

When the chain guide wears off, chirping sounds increase on turning on the engine. The guide may break in the long run, disintegrate and spill dirt into the oil pan.

The result is usually the breaking of a timing chain, most often, on the front left side. 

Usually, drivers can replace the timing chain on the front left side without necessarily bringing out the entire engine.

However, damage on the rear chain of the engine or the dirt is thrown into the crankcase, there will be a need to bring out the engine and make the required repairs.

03. Ignition Coil

A bad situation coil causes many of the failures reported in Ford 4.0 v6. For example, when the engines shake, sputter or misfire, this might indicate a failed or lousy migration coil.

Usually, this is caused by the trickling of water into the bay of the engine. A notable cause of this issue is the use of old spark plugs.

Suppose spark plugs are not replaced after a long time, their gap and resistance. An increase in the gap and resistance of the spark plug causes extra strain to the migration coil.

Inspecting an ignition coil involves assessing the resistance between specific terminals of the ignition coil. Any resistance outside the specified amount will require an immediate change of the coil.

Usually, ignition coils are not repaired; they are changed. When ignition coil damage needs to be replaced, it is advisable to replace all the spark plugs if that has not been done in a long time.

This is because ignition lasts longer when the spark plugs are new.

04. Leaking Radiator

The general design of vehicles causes them to heat up, but the radiator serves as part of the cooling system that regulates the heat released from a car.

Therefore, a faulty radiator can result in overheating of the vehicle.

Which will cause damage to the engine and parts of the cooling system, including the radiator, gaskets, and thermostat. To avoid this, fix a leaking radiator on time. 

Leaking radiators can be caused by sediments and rust that collect over time in the radiator, hose, and hose connection. In addition, terrible servicing habits harm radiators.

For instance, when the radiator is overfilled, it can cause increased pressure, resulting in leakage on the radiator.

The easiest way to prevent advanced damage is by sealing up leaking spots using the appropriate product.

First, leave the engine to cool, then apply the product to the leaking area according to the direction.

05. Faulty Wheel Bearing

Faulty wheels are usually very hazardous and should not be treated lightly. One way you can easily notice a bad wheel is through the irregular noise it makes.

For example, when a Ford 4.0 V6 wheels become weak, it starts to make a kind of irregular noise.

Continuous driving of the vehicle for a long time with the weak wheel can cause the entire assembly to become loose.

Also, a loose wheel might make the steering seem as if it is loose as well. This does not affect the steering wheel, but the steering itself may feel less effective.

Changing the car wheel is the best solution for this problem. It guarantees more excellent safety of the car and driver.

Best Performance of Ford 4.0 V6 Enigine

 When looking to get a car, the engine’s performance is one of the first things drivers put into consideration; Ford 4.0 V6 performance is a fair bargain.

Although it has some customer criticisms, it is altogether said to be a vehicle with good performance. It is also crucial to note that the way a car performs can be affected by management.

Therefore, cars that are managed better will offer better performance for a long time.

Acceleration and Power: Ford V6 offers good acceleration and good power, predominantly when it is driven at a low speed.

But, again, the 5-speed automatic transmission brings out the best of the engine functions. So, although compared to other engines in the same class. 

Eventually, the Ford 4.0 V6 performance may come across as underpowered, it still offers considerably good acceleration and power.

Handling: The engine offers good handling features. It allows for a smooth ride through the road and off the road, giving comfort and refinement.

Also, it manages the effect of bumpy paths and prevents stress and disturbance while driving. It equally moves well on pavements.

Generally, it gives a comfortable handling experience.

Braking: Provided it is applied appropriately, the braking process is also smooth and relaxing. There are no hitches or challenges when using brakes.

As a result, it offers good performance even on long rides. 

Reliability of Ford 4.0 V6: How Reliable are Ford V6 Engines

Ford 4.0 V6 reliability analysis indicates how the vehicle has evolved from other models and has paid better attention to users’ trouble spots and concerns.

Also, it reveals how dependable the model is or how much it disappoints in critical situations. Generally, Ford 4.0 V6 reliability is fair enough.

Transmission Minor

Ford 4.0 V6 fails to respond effectively and quickly to change in gear as it should. As a result, the plastic gear stiffens, causing a delay in transmission.

However, replacing the gear may still leave you in the same situation as before.

Electric System

Another concern with this model is the electric system. Most of its electric connections like the headlight and signal bulb may burn out faster than they should.


Its gauges properly and are reliable, but they sometimes burn out as well.


Also, it has a braking system that is effective and efficient. It comprises of the Antilock Brake System (ABS)

Most Searched FAQs and Facts about Ford 4.0 V6 Problems

Is the Ford 4.0 V6?

Yes, Ford 4.0 is a V6 engine. It has six cylinders and pistons that share a common crankshaft and are arranged to give a V layout like other V6 engines.

Is the Ford Ranger 4.0 V6 a good engine?

Ford Ranger 4.0 V6 is a good engine because it offers good speed, is durable when properly maintained, and offers above-average reliability.

Although it has its design flaws, the positive sides outweigh the negative. It is generally a solid and sound engine.

How many miles will a Ford 4.0 last?

Covering a long with not much repercussion on the engine, this model can last for over two hundred thousand miles and still retain a perfectly sound engine.

That is an equivalent of over three hundred and twenty thousand kilometers. Thus, it is designed to endure long distances and to survive for a long period of time.

How much does a Ford 4.0 engine cost?

A new Ford 4.0 engine costs about $558 on Amazon. So the product is quite affordable and it strong and reliable despite its fair price.

Are all Ford 4.0 engines the same?

Ford 4.0 engine models are closely similar, and some can be used interchangeably, like the ’97 4.0L OHV and the ’00 4.0L OHV, which have identical headers and mount parts.

However, not all 4.0 can replace each other. Some model years are very different from others.

It is advisable to use closely similar models and years.

How much does a 4.0 Ford engine weigh?

The engine should weigh between 420 and 460 lbs. It is just heavy enough to provide strength and durability. 

How much horsepower does a 4.0 v6 have?

Ford V6 generally has the excellent horsepower, but it varies depending on the model.

For example, OHV with 4200 rpm has a horsepower of 115hp to 160 hp; the horsepower for SOHC with a 5250 rpm is 

210hp, while that of the 2011 Ford Ranger is 207hp. The horsepower of 4.0 V6 is good but can be improved to give even higher horsepower. 

What is high mileage for a Ford Ranger with 4.6 v6?

Ford Rangers with 4.6 V6 can have mileage as high as one hundred and fifty thousand miles when appropriately serviced. It is a mighty and high-performing engine with a very long life span.

Usually, the engine is still very functional even after the car have worn out.

Will a 4.0 Transmission fit a 3.0 Ranger?

A 4.0 transmission cannot fit into a 3.0 ranger because both have different bell housing bolt patterns that will not allow them to work interchangeably.

In the same way, a 3.0 transmission will not fit into a 4.0 ranger.

Will a 302 bolt fit a 4.0 transmission?

No, a 302 bolt will not fit a 4.0 transmission because a 4.0 transmission has bell housings bolt pattern that is very different from what the 302 bolt can fit.

In addition, 4.0 was not designed for a 302 bolt. The transmission can, however, be used with an adapter.


Ford Rangers are known to be a good brand of truck, and over the years, they have continuously manufactured engine models that get better than the former.

In addition, they employ a pattern that allows for continuous improvement; for instance, some Ford 4.0 V6 problems are improved in other models, and the 4.0 V6 is equally an improvement from previous models. 

Despite their record of making good vehicle engines, the products of this brand are not without flaws or limitations.

The limitations of 4.0 V6 are discussed in this article, with their possible solutions.

Also, Ford 4.0 V6 reliability and Ford 4.0 V6 performance, usually if significant concerns to drivers and those who wish to purchase new vehicles have been discussed in this article.

Leave a Comment